ZDS Series Vertical Hydrapulper


Application& Feature

  • This vertical pulper crushed fiber bundles and wet pulp blocks by the rolling of rotor and rotating blades;
  • Rotating blades of the pulper produce a strong vortex and formed a high speed cyclone zone around the blade, the speed of the pulp are slow down with the gap increase between this region ,so that the pulp layer formed a speed difference, and the fibers separated because of the friction;
  • Fiber bundles are separated by rub against each other in the gap of the blade and sieve separation, then good pulp out the pulper through sieve hole;
  • The sand, nails and other precipitation debris are accumulation in the miscellaneous mouth of the pulping machine;
  • The pulper blade made by stainless steel casting or steel production, and imported brands bearing.

Main Specification

Type ZDS23 ZDS24 ZDS25 ZDS26 ZDS27 ZDS28
Volume(m2) 5 10 15 20 25 30
ONP Φ6-Φ10 25-35 45-60 65-80 85-100 110-130 130-150
COCO Φ10-Φ16 35-50 60-80 80-100 100-130 130-150 150-170
AOCC Φ6-Φ10 15-25 30-40 45-60 60-75 85-95 95-100
Chemical wood pulp:Intermittent 13-18 25-30 40-50 50-60 65-85 80-100
Motor Power(Kw) 55 110 160 185 220 250

Capacities vary depending on feed size, feed rate, operating conditions, desired product output, characteristics of feed material, and equipment configuration

Download complete technical literature [PDF]

Back To Top
Speak with a sales representative now Contact Sales